Call settings
Send my caller ID
(network service)—You can set your
phone number to be displayed to (
Yes
) or hidden from (
No
)
the person whom you are calling, or the value may be set
by the network operator or service provider when you
make a subscription (
Set by network
).
Call waiting
(network service)—If you have activated call
waiting, the network notifies you of a new incoming call
while you have a call in progress. Select
Activate
to
request the network to activate call waiting,
Cancel
to
request the network to deactivate call waiting, or
Check
status
to check if the function is active or not.
Reject call with SMS
—Select
Yes
to send a text message to
a caller informing why you could not answer the call. See
"Answer or reject a call," p. 18.
Message text
—Write a text to be sent in a text message
when you reject a call.
Tip! To change the settings for call diverting,
select
Menu
>
Tools
>
Settings
>
Call
forwarding
. See "Call forwarding," p. 94.
Automatic redial
—Select
On
, and the phone makes a
maximum of ten attempts to connect the call after an
unsuccessful call attempt. To stop automatic redialing
press the end key.
Tools
88
Summary after call
—Activate this setting if you want the
phone to briefly display the approximate duration of the
last call.
1-touch dialing
—Select
On
, and to dial the numbers
assigned to the speed dialing keys (2–9), press and
holding the key. See also "1-touch dialing," p. 19.
Anykey answer
—Select
On
, and to answer an incoming
call, briefly press any key, except the left and right
selection keys, the power key, and the end key.
Line in use
(network service)—This setting is shown only
if the SIM card supports two subscriber numbers; that is,
two phone lines. Select which phone line you want to use
for making calls and sending text messages. Calls on both
lines can be answered irrespective of the selected line. If
you select
Line 2
and have not subscribed to this network
service, you will not be able to make calls. When line 2 is
selected, 2 is shown in the standby mode.
Tip! To switch between the phone lines, press and
hold # in the standby mode.
Line change
(network service)—To prevent line selection,
select
Line change
>
Disable
if supported by the SIM
card. To change this setting, you need the PIN2 code.